Are Blenders Waterproof or Water Resistant and How to Dry Them?

Smoothies, soups, sauces, and much more can all be made with a blender. But, let’s be honest, they can become a little messy. And when that happens, I instinctively want to clean it up with water. Is it true, however, that blenders are waterproof?

Here’s what I’ve learned through working with mine:

Although the glass or detachable metal container and blade assembly usually are watertight and dishwasher safe, the blender bases are not. The foundation isn’t waterproof, but it can withstand moderate moisture. So wiping it down with a moist sponge is the best way to clean it.

However, certain blenders are unique.

Others may provide alternative cleaning suggestions, and yet others may lack dishwasher-safe components. What happens if you get the motor wet by accident? So let’s dig a little further and make sure we’ve covered all of your bases.

Let’s get started.

If the base becomes wet, would it ruin my blender?

Getting your blender’s base wet will not break it right away. If it’s still plugged in and water gets inside the motor, though, it could cause it to spark. If it does become wet, disconnect it and then let it dry for at least 24 hours before using it again.

You don’t want the engine in the base of your blender to get wet. Although the motor usually is entirely secure and not easily accessible by water, this does not mean that it should be submerged. However, if water does get into the motor for any reason, there are a few things to keep in mind.

It goes without saying that you should disconnect the blender if it comes close to a sink. If the base does become wet, especially if it appears that it has gone inside the base, allow all parts to dry thoroughly before reassembling and using them.

Later in this article, I’ll discuss the best method for cleaning your blender. Overall, you’ll be alright if you don’t get the motor wet. Just make sure everything is dehydrated before using it again. The bottom of your blender, on the other hand, was constructed with possible messes in mind.

Is it possible to blend water in a blender?

Yes, you may use your blender to blend water or other liquids. Water, on the other hand, is excellent for cleaning the carafe of a blender. If you’re going to add water to something you’re blending, cautiously open the lid and keep an eye on your parts to make sure it doesn’t overflow.

Too much water is wrong, and you should keep an eye on the temperature of the water or other liquid you put in your blender. If your liquid is excessively hot, the top of your blender may come off, causing a massive mess in your kitchen and on you. This is due to a buildup of pressure inside the blender. This applies to water, soup, and whatever else comes to mind. You want a comfortable temperature, not one that is too hot.

You might also ask if sparkling water can be added to your smoothies in your blender. It’s simple to think that because sparkling water is carbonated, pressure will increase as well. However, this isn’t true. Because the blades reduce, rather than eliminate, the quantity of carbonation in the liquid.

It’s a light and refreshing smoothie with this combination.

What’s the best way to clean a blender’s bottom?

A moist sponge should be used to clean the blender’s base. If necessary, use a tiny bit of soap, but make sure to wipe with water again. Allow for air drying after that. Just wipe down the base with a Clorox wipe if it’s just a minor mess.

While it may be easy to forget about your blender after each use, you should make it a routine to wash the container.

This includes the blades, and it’s essential to do so to avoid crusty, difficult-to-remove leftovers. Nothing is more frustrating than trying to clean everything correctly with your hand in a blender container. By doing it now, you will save time later.

Not to mention that washing your containers immediately after use is just a quick rinse, and you’re done. When it comes to the blender’s base, you should always strive to wash it by hand. Never submerge it entirely in water, and never put it in the dishwasher! If you want your kitchen equipment to last a lifetime, you must begin by properly caring for them.

A clean and well-maintained blender will also help keep it from making any more noise than necessary.

If the Ninja blender motor gets wet, what happens?

If the Ninja blender motor gets wet, turn it off right away. Allow it to air dry for at least 24 hours after wiping away any excess water. You can also speed up the process by directing a hairdryer at the underneath vents. To avoid overheating the blender parts, turn the heat down to off or low.

Ninja blenders are a unique kind of blender, yet they behave like any other blender when it comes to water. When it comes to blender motors, they are not watertight. Water and other liquids will find their way into the motor, mainly if you’re cleaning the base.

The problem isn’t usually caused by water getting into the motor. Suppose you frequently allow water to get into contact with the motor. In that case, your Ninja blender will eventually stop working due to mildew and a lack of dry surface area.

However, your Ninja blender may not be completely dead and can be revived with a thorough cleaning.

Doesn’t it seem counter-intuitive? The water lingered in your motor the first time it was exposed to it. When you clean it again, make sure to let it dry completely before attempting to dry it with a rag. After it’s completely dry, you’ll probably find that your Ninja blender is as good as new again.

You should clean them on a regular basis and make sure they’re dry, just like any other equipment. WATER AND ELECTRONICS DO NOT COME TOGETHER!

And a rusted or otherwise broken engine can make an already loud blender much worse!

Is it possible for you to dry my blender base if it becomes wet?

If you get a blender’s base wet, make sure to disconnect it. Wipe away any residual water and, if necessary, dry the interior using a hairdryer set to low or no heat aimed at the vents. If the water is mainly on the exterior, though, a kitchen towel will suffice.

Air vents are usually found on the underside of the base or on the back of most blenders. If you turn the base upside down and let it “drain,” mold will grow, and you’ll have much more problems to cope with. As a result, make sure to keep it resting so that any water inside can drain down and out the vents.

You may dry your blender by opening the hatch or opening the base. Just make sure it’s disconnected, and be aware that if it’s still under warranty, opening it up may void it. Use a dry towel to mop up any water once the inside is accessible. As I previously stated, clean the other parts of the blender after each use, but if you have a bad day and forget, don’t worry, I’ve got you covered!

Together with the blade assembly, the blender carafe can be washed in the dishwasher or by hand with soap and hot water. Make sure any residual food is scrubbed away, and be cautious of the blades. Reassemble after everything has dried. Do you have a stiff, stuck-on meal? Fill the container halfway with warm soapy water and run it through the dishwasher a few times.

Just make sure the motor doesn’t get wet!

Have I answered all of your questions about whether blenders are waterproof?

Blenders are a fantastic addition to any kitchen. We always want to be safe with every device we buy, regardless of how small it is. We discovered that you should not use your blender to blend hot water or any other hot liquid.

In this article, we discovered how to clean a blender and why it’s crucial to let everything dry completely before using it. Blenders aren’t waterproof, but don’t let that stop you from having fun. You need to be a bit more cautious, and even if water does get down there, it won’t ruin your day. Check for mold and clean more thoroughly, ensuring that everything is dry.

Stay careful and have fun cooking; just remember to look things up if you have any doubts.