Why does the SodaStream Container have a Distinct Odour?
Why Does My SodaStream Bottle Smell?
SodaStream has transformed reusable drinking alternatives, particularly those who prefer sparkling water versus still water. However, like any reusable container, they might begin to smell and retain undesirable odors. Incorrect usage and a lack of cleaning are the most prevalent causes of a SodaStream bottle stinking. Cleaning your bottle between refills is the best option, even with plain water. Use non-abrasive cleaning tools and odorless soaps to minimize other odors and sour taste.
Why Does My SodaStream Bottle Smell?
Unfortunately, this is primarily because the bottle is improperly cleaned or used. SodaStream bottles are intended to endure CO2 pressure while also serving as a container for fizzy water. They can be easily destroyed if used and maintained like other water bottles. A persistent stench within the water bottle often indicates that the subjected container has been damaged over time.
What Causes The Bottle To Smell?
It’s conceivable that the odor is caused by germs and mold lurking in the bottle’s residual residue. SodaStream syrups, as well as your saliva (if you want to drink directly from the bottle), might leave residues if not properly washed away. If these remnants are left for a few days, they can serve as breeding grounds for foul-smelling bacteria and mold. Bacterial growth can also arise in leftover water if the bottles are not entirely dry before being stored. A stench might also result from a chemical interaction with the bottle’s material. SodaStream bottles are constructed of PET plastic, which can degrade under certain conditions. Contacting the bottles with hot water, chlorine, or even UV rays may damage the plastic and trigger a chemical reaction within your SodaStream container that results in a peculiar ‘plasticity’ odor.
How To Wash My SodaStream Bottle
The secret is to wash your SodaStream bottles frequently, ideally after each use. Try to break the habit of repeatedly filling them up under the guise that ‘it’s only water’ pouring into the bottles. To reduce the possibility of germs breeding in your bottles, it is important to thoroughly empty the bottle of soda and then wash the bottle following the procedure outlined below before making a new batch of soda. The ideal way is to hand-wash with warm soapy water, not boiling water. As previously stated, the PET plastic within the bottle melts when exposed to extreme heat. Therefore soaking the bottles in hot water would only cause more harm. This may weaken the bottle, causing it to break when subjected to CO2 pressure from the SodaStream machine. This is also why the bottles are not dishwasher safe and should not be washed in a dishwasher. Fill 14 full with warm water and a non-abrasive soap to clean a SodaStream bottle. Shake thoroughly and set aside for 30 minutes to soak. The use of abrasive soaps or cleaning products containing bleach can harm the PET plastic and undermine the bottle’s integrity and should be avoided. After soaking, use a long-handled bottle brush to clear out any residue or distinct markings within the bottle. Again, avoid using harsh sponges or brushes as they may scrape the plastic, creating more gaps and crevasses for germs to hide while weakening the bottle. Avoid using metal scourers or sponges made of hard material that might harm the plastic. If you’re cleaning a SodaStream bottle that has already started to smell, soaking it in vinegar or lemon juice may assist in eradicating the odor. Using soaps with a natural aroma may also assist in covering the unpleasant plastic odor. Once you’ve thoroughly cleaned the bottle and removed any residue or sticky syrup, make sure to rinse off any soap; you may need to do this a couple of times. As previously said, placing a damp bottle in a warm storage cabinet is ideal for attracting germs and mold. Then, if feasible, put it upside down on a drying rack to drain and dry thoroughly. Finally, it is critical to clean the caps, especially if you are drinking directly from your SodaStream bottles, since they are frequently the source of mold. Submerge the cap in a basin with the same cleaning solution and scrape off any residue with a gentle toothbrush when soaking the bottle. Before screwing it back onto the bottle, ensure it is scorched.
How can you stop SodaStream Bottle from smelling?
If possible, avoid using your SodaStream bottle as a portable drinking bottle. This increases the likelihood of the bottle being exposed to UV rays if you take it outside, and it also contaminates the bottle and cap with your saliva. It also implies that you are less inclined to clean it regularly. If you want to take your homemade soda to work or out of the house, we recommend putting it into a metal or glass water bottle. If you utilize flavoring syrups, try not to keep a batch of soda in the bottle for longer than a few days. If you can move your soda to another serving bottle or consume it immediately, the plastic will wear more minor, and your bottles will last much longer. Use the approach mentioned above to clean your bottles regularly. Also, try not to keep them filthy for lengthy periods; instead, get into the habit of cleaning them right quickly. Before storage, be sure that all of the soap has been removed and that the container has completely dried. Finally, SodaStream suggests replacing the bottles every three years because the integrity deteriorates depending on how frequently they are used. If your bottles are stinking and are close to three years old, it is probably time to replace them with new ones.